Thursday, June 22, 2017

Sayber Open Source Grinder Project

We Could All Make an Amazing Grinder

One day in February 2017, inspired by the free and cooperative values of open source software; I was thinking that a very good belt grinder could be communally developed and improved in the same way. A sort of Open Source Grinder (OSG) concept.

The goal is to design and make world class 2" x 72" belt grinders and freely distribute the designs. Yup, a crack designer could do that, but ask a few hundred smart knifemakers to refine it, add to it, complete and share their designs.

'nanos gigantum humeris insidentes'
'standing on the shoulders of giants'



The Ball Starts Rollin'

To start the project I designed a basic frame and base in AutoCAD and DraftSight. DraftSight is free CAD software that almost anyone can learn to use.



These are the basic design requirements

Must work with the following belt sizes:
  • 2" x 60" (50 mm x 1525 mm)
  • 2" x 72" (50 mm x 1828 mm)
  • 2" x 78.75" (50 mm x 2000 mm)
  • Direct drive
  • Three phase 56C/143TC motor
  • Variable frequency drive
  • Horizontal or vertical operation
  • Forward and reverse
  • Standard 1.5" square tool arm
  • Flat platen
  • 4" drive wheel
  • 12" contact wheel
  • Universally adjustable work rest
and finally...

NO WELDING REQUIRED!


When the unit is up and running I will be posting the CAD files, so good folks can make their own.

In the spirit of open source software, I will be hosting all submitted files with changes, improvements, modifications and attachments. 

The bill of materials, assembly instructions, CAD files, wiring diagrams and testing and alignment procedures will be coming to http://sayberOSG.com/




I will keep you updated here as the development and testing goes on.

Looking for volunteers. What can you do to help?


Cheers,

Dan